Thermal conductivity: Measurement and Examples - Engistudies

Breaking

Oct 14, 2017

Thermal conductivity: Measurement and Examples

Thermal conductivity is usually denoted as 'k'. It is a property of a material which shows the total value of heat conducted per unit area of the wall per unit temperature in unit time.

Note:

The value depends on directions. Thus, the thermal conductivity of a metal may differ from one direction to other.

Thermal conductance


What is the difference between thermal conductance and thermal conductivity?

We now know what is the thermal conductivity of metals. It is basically a property of a material.

 Thermal conductance is the resistance offered by the material to the flow of heat.


k=q(L/ΔT)

where q is heat flow rate, L is the thickness and T is the temperature in Kelvin.

Thermal conductance (C) can be formulated as below,

C=q/ΔT

It has the same value as (k/L).

Note:

Thermal conductivity = Thermal conductance * Thickness

Also read: Throttling process

Measurement instrument

Thermal conductivity is measured in watts per square meter of surface area for a temperature gradient of 1 K per unit thickness. With expanding thickness, dampness, and temperature the conductivity increments as well.

We can measure thermal conductivity in many ways. We can shop online for such thermal conductivity measuring equipment. The methods can be broadly divided into two types viz. steady state and transient.

The temperature is kept constant when applying steady-state methods. It takes too much time and requires costly setup. 

While in non-steady-state the temperature is raised continuously.

Example with a solution

Find the thermal conductivity through a conductor when 20,000 W of heat flows through it.
Consider:
length = 5 m 
Area = 13 square meter
The temperature gradient = 40 K.

Answer:
Given data:

Heat flow Q = 20,000 W, length L = 5 m, Area A = 13 sq.m, Δ T = 40 K.

The thermal conductivity,
k =  (20,000 x 5) / (13 x 40) = 192.3 W/m K.

Conductivity under standard conditions

The conductivity of metals at atmospheric pressure and around 293 K (20 °C).

Material
Thermal conductivity
Acrylic glass (Plexiglas V045i)
0.170
0.100
237
Copper (pure)
401
1,000
Fiberglas or foam-glass
0.045
0.020
0.046
7.810
0.591
2.940
0.020
Snow (dry)
0.250
0.250

2 comments: